The Setup Program
Installing I/NET
2-14
18.
Setup displays one last screen, shown in
, that
provides you with an option to reboot the computer.
You must reboot for certain configuration changes to take
effect. Activate this option and select
Finish
. Setup will
reboot your computer.
Note:
At this point, the Setup program verifies the TAPI version installed
on your workstation. If you do not have the correct version, a dialog
box will warn you. Locate TAPI2195.EXE on the I/NET 2000 CD-
ROM. Click on the filename to extract the required versions for
Windows 98, NT, and the Readme files. You will need to install the
correct version for your workstation’s operating system. Review the
TAPI Readme files for additional instructions.
Note:
To prevent a nonrecoverable corruption of your data files, do NOT
run Configure at this time if you are upgrading from a previous
version of I/NET. Refer to
19.
If this is an upgrade to a previous version of I/NET or I/NET
2000, run any file conversion programs that did not run
automatically during the setup process.
Figure 2-13. Setup is Complete Dialog Box
Summary of Contents for I/NET 2000
Page 1: ...Getting Started I NET 2000 System TCON238 01 02...
Page 4: ......
Page 28: ......
Page 64: ......
