39
Configuring the Connection to the Internet
Enabling the connection to the Internet allows remote controller software to be constantly updated to the
most current state.
●
Connect the remote controller to the Internet to perform the required update.
●
You can check for the availability of updates by using [INFO] on the remote controller.
Connect to the Internet to enable REMOTE MONITOR.
Internet Connection Procedure
■
Procedural sequence to enable the Internet connection
Preparation
Make sure you have the necessary equipment and proper environment. (Page 39)
Connection with the Internet service
Use LAN cables to connect to your Internet service equipment. (Page 40)
Network settings configuration
Configure the necessary settings to establish the Internet connection. (Page 41)
Setting REMOTE MONITOR,
Communication test
Enable REMOTE MONITOR.
Test the connection to confirm proper communication. (Page 46)
Internet connection is available for use
1. Customer preparation
●
Broadband Internet connection
An always-on broadband connection such as a fiber optic connection, ADSL, or cable modem connection is
required.
●
Broadband router
A broadband router is required.
●
LAN cable
Purchase generic LAN cables that satisfy the following requirements: Straight cables, no longer than 15 m (49.2 ft),
category 5, 5e, or 6e.
* Use LAN cables without boots.
Cables with boots cannot be used because the boot makes contact with the
mounting bracket.
Boot
Without boot
