Quick Start Guide
4
Operating
Environment
The A10160 is intended for indoor use only and should be operated
in a clean, dry environment with an ambient temperature within the
range of 0 °C to 40 °C.
WARNING
The A10160 must not be operated in explosive,
dusty, or wet atmospheres. Avoid installation of
the module close to strong magnetic fields.
Performance
Checks
The instrument has been inspected for mechanical and electrical
performance before shipment from the factory. It is free of physical
defects and in perfect electrical order. Check the instrument for
damage in transit and perform the electrical procedures outlined in
the section entitled Unpacking and Initial Inspection.
Safety
Considerations
The Model A10160 has been manufactured according to
international safety standards. The instrument meets EN61010-1
standards for safety of commercial electronic measuring and test
equipment for instruments with an exposed metal chassis that is
directly connected to earth via the chassis power supply cable.
WARNING
Do not remove instrument covers when operating the
instrument or when the power cord is connected to the
mains.
Any adjustment, maintenance and repair of an opened, powered-on
instrument should be avoided as much as possible, but when
necessary, should be carried out only by a skilled person who is
aware of the hazard involved.
Supplied
Accessories
The A10160 is supplied with a power supply, power cord, two
SMA/M to SMA/M connectors to tie the A10160 to the instrument,
and in some cases, a “Y” splitter cable to connect two A10160 to
the same power supply mains.
