Quick Start Guide
2
A10160 Feature
Highlights
45MHz bandwidth
High amplitude to 34Vp-
p into 50Ω
High output current drive to 1A
Fast transition time of <10ns
Small footprint, all metal case
Custom gain configuration
Low distortion
Figure 1, Model A10160
Introduction
Model A10160 is an ultra-small footprint, wideband, DC coupled
amplifier designed for high frequency, high current, signal
amplification. With a high bandwidth of 45MHz, 34Vp-p into 50
ohms and up to 10W output power, the A10160 is the ideal
complimentary amplifier to any signal source that needs a
supporting power boost for demanding applications.
The A10160 was designed as a “Snap-On” accessory for the Tabor
WaveXciter series and models WS8351/2, both having a maximum
amplitude of 4Vp-p, which can be limiting for some applications,
requiring higher voltage and current to drive their UUT. Combined
with the A10160 the WX and WS models will now offer even higher
abilities to solve demanding application requiring up to 45MHz
signals at 34Vp-p into 50 ohms loads, without compromising their
signal integrity.
Tip
Knowing your source impedance is very important,
because the output gain accuracy is calibrated to
specific source impedance and therefore, any
unmatched load impedance may have an affect on
output level accuracy.
CAUTION
Applying the output signal on inductive or
