12
4.0 Canceling an Erase in Progress
4.1
It is possible to stop an erase in process. First, highlight the drive from the
device list on the main user interface. This can be done in the same way as shown in
section 3.4 of this document.
4.2
Once the drive has been selected, press the button at the bottom of the user
interface screen marked “Cancel”. Figure 4.1 shows the location of this button.
Figure 4.1 – Successful Completion of Erasure Process (Green Bar)
4.3
When the erasure process is canceled, the device will appear with a yellow bar
in the device list showing that the erase has been stopped.
www.tabernus.com Tabernus Enterprise Erase 2400 User Guide 1.888.700.8560