Tab Golden Island Nevada, Operating Instructions Manual

Page: 26 / 71

Security
Select the warning messages which you would like to have. In some configurations you cannot
change or see several settings, because they are required or not allowed, in case of the jurisdic-
tion of the country.
•
„Show Warning after reboot (Clear Warning to continue)“
if enabled, a warning message will be show after power up which must be cleared by the
attendant
•
„Show Error after opening a door (Clear Error to continue)“
if enabled, a red screen with an error message will appear which must be cleared by the
attendant
•
„Sound an alarm when door is opened“
if enabled, an alarm sound will be played 3 times
•
„Loop alarm sound“
if enabled the alarm sound will be looped continuously until the attendant cleared the error
•
„Allow supervisor access to basic configuration settings“
if enabled, the supervisor will have the possibility of changing the following configuration
settings from his supervisor menu:
1. Enable/disable second language if present and selection of basic language (see chap-
ter 9.1, page 17)
2. changing the hopper limits (see chapter 9.2, page 19)
•
„Allow supervisor examination to main accountancy“
if enabled, the supervisor is able to see the main accounting (see chapter 10.1, page 25)
•
„Seperate machine accounting for supervisor“
if enabled, there is an seperate accounting for the supervisor which can be deleted by the
supervisor. This accounting is independently of the operators main accounting.
•
„Check of legal age by attendant required“
if enabled the legal age of a player has to by checked by the attendant. Therefore, the
machine is locked after credits have been inserted. The attendant has to unlock the machine
by clearing the warning message. If the credit drops to zero during playing the player has
40 seconds time to insert more credits without a new check of the legal age.
Machine ID
Enter the data of the site and the machine:
- Location
1 2
Name of Casino / Arcade / Pub
- Machine ID
1
Number of the machine in the location
- Machine Serial Number
3
Number of type plate (i.e. GE0012345)
- Street/number
1
Address of location (i.e. Haiderstr. 40)
- Zip code
1
Address of location (i.e. 4052)
- city
1
Address of location (i.e. Ansfelden)
Page: 18