Tab Golden Island Nevada, Operating Instructions Manual

Page: 25 / 71

9
Configuration settings menu
All of the configuration settings can only be modified if credits are empty.
Some of these settings can be changed only after RAM clear or Factory reset.
Enter the Configuration settings menu by turning on the Configuration settings switch which is
located
inside the Logic box:
•
open the Main door
•
open the Display door
•
open the Logic box
•
turn on the Configuration settings switch
Note:
this operating instruction describes all possible settings of the International version.
Some of these settings may not exist in your configuration.
9.1 Basic Settings
Languages
Select the languages which should be enabled and the basic language.
The machine will switch to the basic language when:
•
Credits are zero
and
•
No interaction for one minute
Date / Time
Select your time zone
1
first and if you like automatically daylight saving changes (strictly recom-
mended).
Correct the actual time and date if necessary (can be changed only after RAM Clear or Factory
Reset)
Note: if you are using OTM you only have to select the correct time zone
1
. The date and time will
be synchronized with the server during the first data transmission.
1
only possible for specific countries
Page: 17