TAB-Austria MAXFIRE HD+, Manual

Page: 6 / 72

Manual MaxFire HD+_en COMPLETE.docx / BG 6
Setup Pointers
Safety regulations for the user:
The machine should only be operated in a dry room and connected to a safety
plug socket that complies with the relevant safety standards.
•
Before starting the machine, it should be allowed to attain room temperature.
• Check the main voltage before connecting the machine!
•
The machine is designed for an alternating voltage of 230 Volts (or 115 Volts if specified
on the type plate) , 50 Hz (or 60 Hz) and 190 W.
•
The machine may only be operated with two 4 ampere fuses.
•
In case of damage to housing parts, protruding wires, machine fires or smashed picture
tubes, the machine must be immediately switched off and the main plug disconnected.
•
Defective or bare wire cables, especially power cables and plug connecters must be
replaced.
ATTENTION:
In such cases ensure that any machine contact is avoided and that it cannot be
switched on!
•
The recommended ambient temperature is 5 – 35 degrees Celsius.
•
The recommended working temperature is 15 – 40 degrees Celsius.
•
The recommended absolute humidity is between 30% and 75% RG, not condensed.
•
When positioned alongside other machines, interference in normal operation
may occur.
• We recommend installing the mounting bracket of the MaxFire HD+ at a height of
190cm.