46
Preparation at the field
Placing into work-
ing position
The machine must be used in working position. To bring the machine
into working position, the following steps are necessary:
•
the right wheel must be in working position
•
the loading arm lock must be removed
Right wheel in work-
ing position
The right wheel must be in working position.
> Remove the locking pin
> Remove the pin
> Place the wrench on the hexagon bolt
> Use the wrench to turn the wheel into working position
> Place the pin
> Place the locking pin
> Remove the wrench
Loading arm lock
The loading arm must be placed into working position.
> Remove the locking pin
> Remove the pin
> Move down the loading arm completely
> Mount the pin
> Lock the pin with the locking pin
The locking pin must be in the right hole.
Locking pin
Pin
Working position
Wrench
Hexagon bolt
Locking pin
Pin
Right hole
Summary of Contents for 7420
Page 5: ...Table of contents 5...
