8
Assembly & disassembly on the board.
— 05
—
Assemble
the foil on
the board
—
To
Disassemble
the foil
1
Mount the mast to the Plate Mount by using the 3 M6x30 mm Torx screws. Add the optio-
nal Power Box mount as needed. Or replace with the Tuttle mount. Lay the board upside down
(hull up).
2
Insert the heel of the foil, already mounted onto the mast box provided, in the hull and align
the rails of the board in the case of a Plate Mount.
3
In the case of a Tuttle or Power Box, tilt the board on the edge and carefully drive it inside
the board mounting box.
4
Tighten the M8x30mm screws, remembering to place the 18mm rubber washers. Lay the
board upside down (hull up).
1
Place the board + foil upside down (hull up).
2
Disassemble the wings and fuselage.
3
Tilt the board on its edge to unscrew the M8 screws attaching the board to the mast box
(Tuttle Box or Power Box) or unscrew with the board upside down in the case of a plate mount
4
Remove the mast from the board.
By steps :
— 02
UP
ALUMINIUM
UP
CARBON
TAAROA masts are mounted on the board by a mounting box system. Different
types of mounting boxes are available to adapt to board mounting systems :
Deep Tuttle
Plate Mount
Plate Mount
— 01
EN
The UP Carbon comes with a default Plate mount adaptable to Tuttle/Power Box:
Power Box