background image

 

Guarantee conditions 

Note: 

The  following  guarantee  conditions  do  not  limit  the  statutory  right  to  a  warranty,  but 

rather expand your consumer rights. 

 

1.  Technische Alternative RT GmbH provides a two-year guarantee from the date of purchase to 

the  end  user  for  all  devices  and  parts  it  sells.  Defects  must  be  reported  immediately  upon 
detection  and  within  the  guarantee  period. Technical  support  can  supply  the  correct  solution 
for almost every known problem. In this respect, contacting us immediately will help to avoid 
unnecessary expense and effort in troubleshooting.  

 

2.  The guarantee includes free repair (but not the cost  of on-site fault finding, removal, refitting 

and shipping) due to operational and material defects which impair the function. In the event 
that a repair is uneconomical in the opinion of Technische Alternative for reasons of cost, the 
goods will be replaced.  

 

3.  Excluded  is  damage  resulting  from  the  effects  of  a  voltage  surge  or  abnormal  ambient 

conditions.  Likewise,  no  liability  can  be  accepted  if  the  device  defect  is  due  to:  transport 
damage for  which  we  are  not responsible,  incorrect  assembly  and  installation,  incorrect  use, 
failure to observe the operating and installation instructions or incorrect maintenance.  
 

4.  The  guarantee  will  become  void  if  repairs  or  actions  are  carried  out  by  people  who  are  not 

authorised  to  perform  them  or  have  not  been  so  authorised  by  us,  or  if  our  devices  are 
operated with spare parts, auxiliary parts or accessories that are not considered to be original 
parts. 

 

5.  Faulty parts must be returned to our factory with a copy of the proof of purchase and a precise 

fault description. Processing is accelerated if an RMA number is requested via our homepage 

www.ta.co.at

.The defect must be clarified with our technical support beforehand. 

 

6.  Services provided under guarantee result neither in an extension of the guarantee period nor 

in  a  commencement  of  a  new  guarantee  period.  The  guarantee  period  for  fitted  parts  ends 
with the guarantee period of the whole device.  

 

7.  Further or other claims, especially those for compensation for damage other than to the device 

itself, insofar as such liability is not required by statute, are excluded. 
 

Legal notice 

These installation and operating instructions are protected by copyright.  
Use outside the copyright requires the consent of Technische Alternative  RT GmbH. This applies in 
particular to reproduction, translation and storage on electronic media.

 

Technische Alternative RT GmbH 

A-3872 Amaliendorf Langestraße 124 

Tel ++43 (0)2862 53635                     Fax ++43 (0)2862 53635 7 

 

E-Mail: 

[email protected]

                      --- 

www.ta.co.at

  ---                                © 2017 

 

Summary of Contents for UDV

















Reviews: