TA R-Net Attendant, Operating Manual

Page: 12 / 44

12
BUTTONS AND SYMBOLS
On/off
To turn the wheelchair on or off
☞
On start-up, the electronics perform a system test.
Horn
An audible tone sounds the entire time the button
remains depressed.
Profile
When pressed, switches to the next driving profile.
☞
Only for the
LCD
joystick module.
☞
Follow the instructions in the chapter
Driving program
on page 30.
Max. pre-set
Plus speed.
Increases the max. speed one level at a time (20%).
☞
We recommend only using the Plus button
when the electric wheelchair is in a stationary
position.
☞
Level 1 (20%) up to a max. level of 5 (100%).
Max. pre-set
Minus speed.
When pressed, decreases the max. speed one level at
a time (20%).
☞
For safety reasons, we recommend only using
the
Minus button when the wheelchair is in a
stationary position.
☞
Level 5 (100%) down to a min. level of 1 (20%).
Hazard light
When pressed, turns the hazard light on or off.
☞
The indicator lamp flashes in time with the turn signal.
Lights
When pressed, turns the lights on or off.
☞
The indicator lamp flashes when the lights are turned on.
Left turn
signal
When pressed, switches the turn signal on or off.
☞
A rapidly flashing indicator lamp means that a turn signal is defective.
Right turn
signal
When pressed, switches the turn signal on or off.
☞
A rapidly flashing indicator lamp means that a turn signal is defective.
Mode
When pressed, toggles between Drive mode and Set-
tings mode.
☞
Only press the Mode button when the electric wheelchair is in a sta-
tionary position.
☞
Follow the instructions in the chapter Mode menu on page 23.