Discovery DSC™ Getting Started Guide
Page 28
The Discovery DSC back panel has thirteen ports; the table below provides a description of the function of
each port.
Figure 9
Discovery DSC rear panel connections.
Table 4:
Discovery DSC Back Panel
Port
Function
GAS 2
Gas inlet port controlled by the gas delivery module. Used, when needed, for the
secondary sample purge gas.
GAS 1
Gas inlet port controlled by the gas delivery module. Used for the primary sample
purge gas and base purge gas – use Nitrogen only.
COOLING GAS
Provides air for the Finned Air Cooling System (FACS), and nitrogen for the
Refrigerated Cooling System (RCS) to prevent condensation when the lid is open.
24 VDC OUT
May be used for certain accessories.
EVENT
This port is used for the RCS and Photocalorimeter Accessory (PCA) control.
USB 2.0 port
Provides communications for external accessories.
Micro USB 2.0 port
Provides communications for external accessories.
SD memory card slot
For TA Instruments Service use only.
CAN Communications Port
Provides communications with external accessories.
RS-232 Port
Provides communications with external accessories.
Ethernet
Provides communication between the instrument and the PC.
Audio Jack
External speaker connection.
Power Entry Module
(power cord, switch, fuses)
Provides power and protective earthing to the system.
GAS 1 port
COOLING GAS
GAS 2 port
CAN Port
24 VDC OUT
RS-232
Port
Power Entry Module
EVENT
Ethernet port
SD card port
Micro USB port
USB port
Audio jack
Status LEDs
