T3 77582, User Manual

Page: 17 / 56

17
ENGLISH
Model Name:
T3 Edge
Model Description:
Heated smoothing & styling brush
Model Number:
77582
Responsible Party in USA:
T3 Micro, Inc.
880 El Segundo Ca 90245
866.376.8880
Test Report Number:
21090203HKG-001
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
No change or modification to this equipment shall be made without the express
written approval of the “responsible party” as defined in the FCC’s rules.
SUPPLIER’S DECLARATION OF CONFORMITY
47 CFR § 2.1077 COMPLIANCE INFORMATION