Step by Step
Making Calls – Basic Functions
16
Making Calls – Basic Functions
Answering Calls
Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone rings once ev-
ery four seconds (single-tone sequence).
• When you receive an external call, your telephone rings twice in
rapid succession every four seconds (dual-tone sequence).
• When you receive a call from the entrance telephone, your tele-
phone rings three times in rapid succession every four seconds
(triple-tone sequence).
• If a call is waiting, you hear a short tone (beep) every six seconds.
The number or the name of the caller appears on the display.
Answering a call via the handset
The phone is ringing. The caller appears on the screen.
^
Lift the handset
+
or
-
Raise or lower the volume. Keep pressing the key until the desired vol-
ume is set.
Answering a call via the loudspeaker
(speakerphone mode)
The phone is ringing. The caller appears on the screen.
n
Press the key shown. The LED lights up.
Speakerphone mode.
+
or
-
Raise or lower the volume. Keep pressing the key until the desired vol-
ume is set.
Your service personnel can adjust the ring cadence for exter-
nal and internal calls for you. In other words, different ring ca-
dences can be set for different internal callers.
