5
Installation Notes:
STEP 1.
Place your T-SOX on a stable surface, and slightly pull up the knob A in the direction
of the arrow. Unfold the two legs in the direction of the arrows. Tighten the legs by
turning the knob A in the arrow direction.
○
○
STEP 2.
Using the stabilizer pad kit, place 4 sets of stabilizer pad B and 1 set of M10 adjust-
ment stabilizer pad C in the relative position of the main unit, and screw them up
into the front and rear legs and the frame.
○
○
STEP 3.
Assemble the 130 mm or 135 mm left-end cap. T-SOX comes pre-configured out of
the box for bicycles with 130/135 right-end cap. Press the 130/135 left-end cover D
into the axle hole of the frame, and then insert the bicycle quick release rod E into
the axle hole of the frame.
○
○
