T Scale JW, Operating Manual

Page: 3 / 6

JW weighing scales operation manual
REV: C1, June 2012
JW weighing scales operation manual

Press ZERO to confirm when display gets stable.

Display will be show previous calibration weight and start to blink
first digit, if necessary enter the calibration weight value by
pressing MODE and % keys.

Press ZERO to confirm
, display will be show “ load ”

Place the load on the platform.

Press ZERO to confirm when display gets stable.

Calibration will be finish and will start to self test to come normal
weighing.
Note: Calibration weight should be 1/3
rd
of the scale capacity.
Linear Calibration

Turn on the scale and press TARE key during the self test..
Display will be shown
” p Cal ”.

Press TARE key t
o select “ p1 Lcal ”

Press ZERO to confirm
, display will be show “ unld ”

Remove all weight from the platform.

Press ZERO to confirm when display gets stable.

Display will be show 1/3
rd
of the scale capacity

Place the calibration weight on the platform

Display will be show 2/3
rd
of the scale capacity

Place the calibration weight on the platform

Press ZERO to confirm when display gets stable.

Display will be show full of the scale capacity

Place the full capacity of the calibration weight on the platform.

Press ZERO to confirm when display gets stable.
Linear Calibration has finished and will start self test to come to normal
weighing.
-8--
1. INTRODUCTION

The JW series weighing scales are suitable for general weighing,
check weighing, parts counting, and percent weighing.

Capacities from 6kg to 45kg

25 membrane keys

Rechargeable battery provide up to 70 hours of continues use
(without backlight)

Large 52mm LCD with white LED back light display.
2. NAMES AND FUNCTIONS
2.1 Key Board
Keys
Description
ZERO
Set the display to zero.
TARE
To perform a tare function, Subtracts weights.
% To set percent weighing
Set the limits for check weighing
MODE To change weighing units in weighing mode.
To change unit weight / count / total weight in counting
mode.
To change display to weigh mode temporary in percent
mode
G/N
To select gross weight / net weight
PRINT
To send the data to PC or printer
MC
To clear accumulate weight .
MR
To show total accumulate recall memory
-1-