20567
09-12 FORD
F150 PLATINUM
20567
09-12 FORD
F150 PLATINUM
09-12 FORD F150 PLATINUM
Billet Grille 2 Pc.
Thank you for purchasing a T-Rex Grille.
10/1/09
Page 2
Fig 7
Step 5
While holding the billet grille in the grille shell, turn the grille over so you can
work on the backside. Make sure the billet if flush with the front side of the grille
shell and use a couple pairs of vise grips to hold the tabs on the billet grille to
the grille shell, this will keep the billet flush while you install it.
Step 6
Drill a 1/8” hole through the brackets on the billet and the grille shell. Install the
screws through the brackets and the grille shell making sure they install inward
toward the center of the grille in the top opening (this is so the hood will close
without the screws interfering) and put a flat nut on the back then tighten (Fig 7).
On the bottom opening make sure the screws insert from the center of the grille
outward through the grille shell (Fig 8) and install a flat nut. Make sure all the
screws are tight, reinstall the grille shell on the vehicle along with the hardware.
Installation complete.
Step 3
Next use the die grinder to smooth out where the cuts were made. Go around the
entire inside of the grille shell and grind it smooth (Fig 5).
Step 4
Once the inside of the grille shell is smooth, lay the billet grille into the opening.
(Fig 6)
Fig 5
Fig 6
#10 Screws (Longer)
Fig 8
