ASSEMBLY MANUAL – SEARAILS RR-XX – 0-4-0 SYTEAM LOCOMOTIVES
3/30/15
T R Knapp Model Engineering
8
21
Fix front pilot in place with
screws; cut length of wire and
slip into valve rod hole on
cylinder casting and glue in
place at aft end; slip etched
crosshead guide into slots and
glue in place at aft end only.
12
Test ALL LED lamps with
N’gineering LED tester.
(N’gineering LEDs have color-
coded leads. Richmond
controls LEDs will need to be
marked after trimming to 1-1/2”
length.)
Solder LEDs together in pairs,
anode (+) to cathode (-).
13
Solder LEDs together in pairs,
anode(+) to cathode (-)
