82
Configuration Examples
Comfort Pro S in a LAN with an IP-enabled Server
N
Note:
To access the Comfort Pro S under the same IP address after a restart, you must
specify this IP address permanently on a DHCP server. On a DHCP server it is possible
to link the MAC address of a network card with a specific IP address. You will find de-
tails in the server documentation.
Internet Access
You can also use the Comfort Pro S as an Internet access server in a LAN with an IP-enabled server. To do
this, you must enter the Comfort Pro S IP address on the server as the default gateway. In addition, you must
edit the internal DNS server configuration so that the resolution of external DNS names is forwarded to the
Comfort Pro S.
In this example, the Internet connection is established from a workstation via the server, which in turn
requests Internet access from the Comfort Pro S.
There are two different ways of suitably configuring the internal DNS server. You can enter the Comfort Pro S
IP address as a DNS forwarder. If you require access to extended DNS information, you can also configure the
DNS server for a recursive DNS request without the DNS forwarder. For further explanation, refer to the DNS
server documentation.
The Comfort Pro S as a DNS server in a LAN with an IP server
Comfort Pro
(Internet)
S
0
Net
PC 2
Net
S
0
int
Server
(DHCP, RAS,
int. DNS)
S
0
Net
ISP
(DNS)
S
0
PC 1
Net
Hub
WAN
Summary of Contents for Comfort Pro S
Page 1: ...Comfort Pro S Mounting and Commissioning Installation Guide...
Page 2: ......
Page 166: ...164 Index Notes...
Page 167: ......
