T-Home Comfort Pro S, Installation Manual

Page: 35 / 168

33
Interface Cards Installation
4. Close the cover as far as the protection plate (see Opening and Closing Comfort Pro S starting on
page 27, steps 7 to 9). Connect the required connection cables to the relevant connection blocks (see
also Position of the Interfaces starting on page 35).
5. Close the cover of the device completely. Switch on the Comfort Pro S.
Comfort Pro S’s software can identify the type of interface card. After installation the interface card must be
individually configured before starting operations.
Once you have restarted Comfort Pro S you can view the interface cards’ status in der Web console. to do this,
call up the menu item PBX Configuration: Ports: Slots . You will see a green tick in the Status column in the
table next to the slot’s number ( 1 or 2 ). The type of interface card must also be also shown in the hidden
column.
Installing a Fax/V.24 Card
Comfort Pro S’s Fax/V.24 slot
Comfort Pro S has a small slot for a special Fax/V.24 card. You can see the position of this slot in the adjoining
diagram. The Fax/V.24 card is available in the following combinations:
■
V.24 card
■
Combined Fax/V.24 card
handle only here
handle only here
socket