T-Fal KM740, User Manual

Page: 9 / 54

EN
7
CAUTION: The coffee maker becomes very hot during the brew
cycle. Please handle with care.
8- When the brewing cycle is completed, the
On/Off button (k) will stay illuminated as
the keep warm cycle starts. The keep warm
button (l) will illuminate orange
(Fig. 8)
.
The anti drip valve will prevent any
remaining coffee dripping onto the hot
plate. Ensure that the carafe is replaced on
the hot plate after serving.
During keep warm mode, bars on the
outside of the clock face indicate how long
ago the coffee was brewed
(Fig. 9)
.
Notes: When the brewing cycle is finished, there
will still be hot liquid in the filter basket. Wait a
few minutes for the rest of the liquid to drip
through into the carafe.
- The keep warm function will operate for up to
two hours. During the keep warm cycle, the
On/Off button
(k)
will stay illuminated as well
as the keep warm button (l) . At any time
you can stop the keep warm cycle just by
pressing the On/Off button
(k) . The LED will
switch off and the LCD will display the clock
again.
9- Open the top lid and carefully remove the
filter holder by grasping the tabs on each side
of the filter holder, and lifting straight up
from the filter holder. Discard the used coffee
filter and grounds. If you use the permanent
filter, wash it immediatly (see section 7
CLEANING)
(Fig. 10 and 11)
.
Note: At any time
during the brewing
cycle, you can turn
the coffee maker
off by simply
pressing the On/Off
button (k). No
buttons will be
illuminated,
indicating that the
coffee maker is off.
Note: If two or
more pots of coffee
are to be made it is
recommended that
the coffeemaker be
allowed to cool for 3
minutes between
each brewed pot.
TF_COFFEEMAKER_KM740_NC00115301_NAFTA_EXE 12/09/12 11:26 Page7