T-Fal IS55 Series, Instructions For Use Manual

Page: 7 / 38

IMPORTANT SAFETY
INSTRUCTIONS
This appliance complies with the technical rules and standards for
safety currently in force (Electromagnetic compatibility, low voltage,
environment…).
Warning ! The voltage of your electrical installation must correspond
to that of the appliance (120V or 127V). Connecting to the wrong
voltage may cause irreversible damage to the appliance and will
invalidate the guarantee.
When using your appliance, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
- To reduce the risk of contact with hot water emitting from steam vents,
check appliance before each use by holding it away from body and
operating steam button.
- Use appliance for its intended use only.
- To reduce the risk of electric shock, do not immerse the appliance in
water or other liquids.
- To reduce the risk of electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
- Appliance should always be turned « OFF » before plugging or
unplugging from outlet. Never pull the cord to disconnect from the
outlet, instead grasp plug and pull to disconnect.
- Do not allow cord to touch hot surfaces. Let appliance cool completely
before storing away. Loop cord loosely around appliance when storing.
- Do not direct steam at people or animals, or use steamer on garments
while they are being worn.
- Always disconnect appliance from electrical outlet when filling with
water, emptying or when not in use.
- Do not operate appliance with a damaged cord, or if the appliance has
been dropped or damaged. To reduce the risk of electrical shock, do not
disassemble or attempt to repair the appliance, take it to a qualified
service person for examination and repair. Incorrect reassembly or repair
EN
1
9100017370 IS5510 Q0-X0_110x154 26/06/14 16:17 Page1