4
s
«Deluxe» model • Specific functions - Fig. 4
Interrupting toasting process
• The toaster has a «STOP / EJECT»
s
function.
So that you can interrupt the toasting process at
any time by pressing the «STOP» button.
The bread will automatically pop up.
(For example, if you realise that the settings are
not properly adjusted or if you think the bread is
sufficiently toasted).
• If the bread jams in the slots and the elements
do not switch off, remove the plug from the wall
outlet and wait for the appliance to cool down.
Then carefully remove the bread from the toaster
slot, taking care not to touch the heating
elements.
• When toasting currant buns or teacakes,
remove any loose currants from the bread
before placing them in the toaster. Loose
currants may fall into the appliance and
damage the toaster.
Stop / Cancel
• To stop the toaster at any time or cancel the
other functions, press the «STOP»
s
button.
• The bread pops up, the toaster switches off.
Reheat
• To reheat toast (fixed, short time) lower the bread
into the toaster and press the «REHEAT» button.
• The toaster will heat up independently from the
setting of the browning control (1 and 6).
• At the end of the cycle, the bread will pop up
automatically and the toaster switches off.
Stopping the toasting process
• Once toasted, the operating control is
automatically unlocked, the slices of bread
come up and the toaster stops working.
Making toast
• To load the toaster, press down the loading
command until it locks in position, toasting
begins. The metal grills will automatically
adjust to the thickness of the slices.
•
On electronic models, the loading lever can
only be locked in the lower position when the
appliance is plugged in.
• After extended use, crumbs or dust may block the
locking system. To correct this, simply press down
the loading command several times successively
to lock it and please refer to maintenance and
cleaning tips.
4
5
Bagel -
Fig. 5
• Select the browning level desired on the dial from
1 to 6. Place your bagel cut in two parts in your
toaster, the soft part towards the centre
(Fig. 5).
Press down the loading command and switch on
the bagel touch. Only the central heating
elements working on.
• Your bagel will be toasted according the position
choised on the cut face and will be crispy on it
external side.
• At the end of the cycle, the bagel will pop up
automatically and the toaster switches off.
• If your bagel is too heavy, pull up the loading
command to bring it out.
• Do not use the Hi-Lift button during toasting.
s
Avanti Bagel 2T 2002.qxd 09/10/2002 15:44 Page 4
Summary of Contents for Avante Deluxe
Page 2: ...1 2 3 4 5 6 7...
