- Rinse the tip with tap water
- Insert it back into its housing and push into place.
❊
Self-cleaning: twice a month
- Fill the tank to the maximum filling mark.
- Set the steam adjustment control (C) to dry “O”
- Set the thermostat control to max.
- Plug in the iron and wait for the thermostat lamp to go out
- Unplug the iron and place it above a sink
- Remove the valve from its housing
- Shake the iron gently until all the water in the tank has flown out with impurities through the sole-
plate.
- After the operation, reinsert the anti-clogging valve correctly.
- Wait until the soleplate has completely cooled down before wipping it with a soft cloth.
12 - STORAGE
- Lower the thermostat to the minimum.
- Set the steam adjustment control (C) to dry 0, unplug the iron and wait
until the soleplate has cooled down completely.
- Empty the tank of all water.
- Wrap the cord around the heel. Stand the iron upright on its heel to store
it.
13 - PRACTICAL TIPS
❊
Our products are manufactured in compliance with the highest quality standards. If you have any
problems with our product, please consult the table below, in order to find a rapid solution to your
problem.
❊
If you do not find the cause of the problem, please contact our Consumer department.
19
20
Caution: the iron cannot operate without the anti-clogging valve.
21
