T-Comfort Comfort Pro S, Mounting And Commissioning Manual

Page: 53 / 200

51
Port Assignment, Termination, Cable Length Installation
Mail
If you are using an external mail system, it must be able to handle the number of digits used for internal
telephone numbers, e. g. five digits, if you have set up the system to use 5-digit internal numbers.
The mail system can be connected to the internal a/b ports or to the internal S
0
ports, but for both types of
ports the mail system can send messages to system terminals using code procedures:
*68Z
[Terminal]
0
: Message exists for this subscriber
*68Z
[Terminal]: No message exists (without trailing “0”).
Intercom System (for a/b)
The intercom systems “DoorLine T01 / 02” and “DoorLine T03 / 04” can be connected via the “DoorLine
M06” to any a/b port. The “DoorLine” module also provides the actor for the door opener contact.
Please observe the following points when connecting the door intercom system:
■
The door intercom system and the “DoorLine” module should be set to their factory settings.
■
In the Telephony : Ports : a/b : Change menu in the Configurator, select Doorstation 2-wire as the Type .
Deactivate the Actor option if you want to use the Comfort Pro S actor port instead of the “DoorLine” relay
to open the door. The “DoorLine” actor can only be used if the speech channel is open at the same time.
The internal actor can be used at any time.
■
The “DoorLine” intercom system has a number of bell keys to which you can assign various call numbers
in the Configurator under the menu item Telephony : Ports : Doorbell .
■
You can call the “DoorLine” intercom system by using the code procedure
*102
.
■
The “DoorLine” can be connected to any a/b port, but you can only operate one “DoorLine” intercom
system using Comfort Pro S.
You will find more detailed information on installing and configuring the “DoorLine” intercom system in the
product’s user guide.
The intercom system should only be connected by a skilled electrician, because sensor/actor contacts must
be connected to the “DoorLine” module.