t.amp E-1500, User Manual

Page: 22 / 40

17 [BREAKER] | Resettable fuse. The fuse switches off when the power consumption of the power amplifier is too high.
Once the problem is resolved, the fuse is automatically reset and the device is ready for use again. The switch can be
used to force the reset.
18, 19 [OUTPUT] | Output channel B, A
n
Speaker Twist chassis connector for speaker output (1+, 2+: positive; 1–, 2–: negative)
n
Screw terminals
20, 22 [INPUT] | Input channel B, A
n XLR chassis socket
n ¼-inch (6.35-mm) jack (balanced or unbalanced)
21 [GROUND] [LIFT] | Ground / lift switch. If hum is caused by a ground loop, you can use this switch to disconnect the
connection between the earth pin of the device and the signal ground of the device.
23 [LIMITER] | Limits the output level so that the maximum distortion is 5%.
24 Selector switch for input sensitivity
25 Selector switch for operating mode
n
[Parallel] : Parallel mode
n
[Stereo] : Stereo mode
n
[Bridge] : Bridged mode
Connections and operating elements
22
E-400, E-800, E-1200, E-1500
Power Amplifier