T+A TLW 2 A, User Manual

Page: 21 / 24

21
Connecting the sub-woofer to a surround decoder
Wiring diagram 3
Switch / adjustor settings
No. Purpose
No
control
voltage
Control
voltage
present
Automatic power-on AUTO
AUTO
Control signal
CTRL
Filter OFF
OFF
The settings of the switches / adjustors , , and
can be changed as required.
The Cinch lead carrying the SUB OUT signal from the
surround decoder is connected to one of the sub-
woofer's
CINCH IN sockets .
Since the SUB OUT signal is filtered in the decoder, the
Filter switch must be set to the ' OFF ' position.
Use without control voltage:
The automatic power-on circuit is triggered by the
SUB OUT signal.
Use with control voltage (optional):
If the surround decoder features a control voltage output,
this control voltage is passed to the
DIN IN socket via
an adaptor lead. This triggers the automatic power-on
circuit.
The DD 1210 R and DD 1510 R surround decoders
supply a control voltage at the 5.1 OUTPUT socket.
Connecting the sub-woofer to the K6 DVD
surround receiver
Wiring diagram 4
Switch / adjustor settings
No. Purpose
Control voltage
present
Automatic power-on AUTO
Control signal
CTRL
Filter
OFF
The settings of the switches / adjustors , , and
can be changed as required.
The sub-woofer output signal ( SUBW ) from the K6 is
passed to the DIN-IN socket on the K6 via the AKS6
adaptor and the SC
LINK
lead.
Since the SUBW signal is filtered in the K6 , the Filter
switch must be set to the ' OFF ' position.
The control signal is present at the CONTROL socket of
the K6 . It reaches the DIN IN socket by the same
route, and triggers the automatic power-on circuit.