T+A R 1260 R, User Manual

Page: 31 / 50

31
Direct control of the CD player
Playing a CD
•
Open the CD drawer (     button)
•
Place the CD in the drawer, printed face up
• Close the CD drawer (

 

button)
Immediately after you close the drawer the CD player
reads the Table of Contents of the disc; the screen
shows the message
'READING' , and during this period
the unit ignores any button-presses.
After this period the screen displays the current
operational mode and the total number of tracks on the
CD in the machine, e. g.:
'STOP 16' .
• Start the playback process (     button)
Playback begins and the screen shows the operational
state and the number of the currently running track:
'PLAY 01' .
At the end of the final track the CD stops playing and the
screen shows
'STOP' again, together with the total
number of tracks on the CD.
Variations:
If you press the     button after placing a CD in the
drawer, the drawer closes and playback starts with the
first track.
You can interrupt playback at any time by pressing the

 
 button. During the interruption the screen shows
the message 'PAUSE' .
Playback continues when you press the

 

or
    button again.
If you press the     button briefly during playback,
the player jumps to the start of the next track.
Pressing the     button briefly during playback
causes a jump to the start of the previous track. If the
button is held pressed in, the machine jumps back
several tracks.
Pressing the     button briefly halts the playback
process; screen display: 'STOP' .
Pressing the     button briefly opens the CD drawer.
Track selection
During playback
Press the     or     button repeatedly until the
number of the track you wish to play appears on the
screen after the
'PLAY' message.
Playback is interrupted briefly when you release the
button; and then the track you have selected is played.
Note:
You can also enter the number of the track you wish to
listen to directly using the numeric buttons on the remote
control handset.
Repeating a passage (A-B)
The first step is to search for the starting point of the
passage you wish to repeat:
The screen shows a flashing letter 'A' in front of the
current track number inviting you to set the start marker:
'PLAY AB 08' .
Press the     button briefly to set the start marker.
After a short period you will see a flashing letter 'B' ,
inviting you to set the end marker: press the    
button again at the end of the passage you wish to
repeat.
The CD player now repeats the passage between the
two markers until you press the
    button. The
buttons     and     resume playback without
repeating the passage.
Notes:
•
You can use the fast forward / rewind buttons    
and     to search for the start and end points of
the passage.