background image

Disconnect the mains plug at the wall socket before 
cleaning the case.
The surfaces of the case should be wiped clean with a 
soft, dry cloth only.
Never use solvent-based or abrasive cleaners!
Before switching the unit on again, check that there 
are no short-circuits at the connections, and that all 
cables are plugged in correctly.

If the device has been in storage, or has not been used 
for a protracted period (> two years), it is essential to 
have it checked by a specialist technician before re-
use.

The terminals (marked with the 

-symbol) 

can carry high voltages.

Always avoid touching terminals and sockets and 
the conductors of cables connected to them. Unless 
ready-made cables are used, all cables connected to 
these terminals and sockets must always be deployed 
by a trained person.

In its original condition the unit meets 
all currently valid European regulati-
ons. It is approved for use as stipulated 
within the EC.

By attaching the CE symbol to the unit T+A declares 
its conformity the EC directives and the national laws 
based on those directives. The declaration of confor-
mity can be downloaded from www.ta-hifi.com/DoC.
The original, unaltered factory serial number must be 
present on the outside of the unit and must be clearly 
legible! The serial number is a constituent part of our 
conformity declaration and therefore of the approval 
for operation of the device. The serial numbers on the 
unit and in the original T+A documentation supplied 
with it (in particular the inspection and guarantee cer-
tificates), must not be removed or modified, and must 
correspond.
Infringing any of these conditions invalidates T+A 
conformity and approval, and the unit may not be ope-
rated within the EC. Improper use of the equipment 
makes the user liable to penalty under current EC and 
national laws.
Any modifications or repairs to the unit, or any other 
intervention by a workshop or other third party not 
authorised by T+A, invalidates the approval and ope-
rational permit for the equipment.
Only genuine T+A accessories may be connected to 
the unit, or such auxiliary devices which are themsel-
ves approved and fulfil all currently valid legal require-
ments.

The only permissible method of disposing of 
this product is to take it to your local collec-
tion centre for electrical waste.

Registration according to the EU directive 
“Waste Electrical and Electronic Equipment”
WEEE-Reg.-No.: DE 

72473830W

The case should only be opened by a qualified spe-
cialist technician. Repairs and fuse replacements 
should be entrusted to an authorised T+A specialist 
workshop. With the exception of the connections and 
measures described in these instructions, no work of 
any kind may be carried out on the device by unquali-
fied persons.
If the unit is damaged, or if you suspect that it is not 
functioning correctly, immediately disconnect the 
mains plug at the wall socket, and ask an authorised 
T+A specialist workshop to check it.

The unit may be damaged by excess voltage in the 
power supply, the mains circuit or in aerial systems, as 
may occur during thunderstorms (lightning strikes) or 
due to static discharges.
Special power supply units and excess voltage pro-
tectors such as the T+A ‚Power Bar‘ mains distribution 
panel offer some degree of protection from damage to 
equipment due to the hazards described above.
However, if you require absolute security from damage 
due to excess voltage, the only solution is to discon-
nect the unit from the mains power supply and any 
aerial systems.
To avoid the risk of damage by overvoltages we recom-
mend to disconnect all cables from this device and 
your HiFi system during thunderstorms.
All mains power supply and aerial systems to which 
the unit is connected must meet all applicable safe-
ty regulations and must be installed by an approved 
electrical installer.

The device is not designed for use by children. The 
device must not be operated unsupervised. Make sure 
that it is out of reach of children.

Batteries shout not be exposed to excessive heat like 
sunshine, fire or the like.

Very loud continuous listening to program material via 
earphones, headphones and loudspeakers can lead to 
permanent loss of hearing. Prevent health risks and 
avoid permanent hearing at high volume.

If the device has to be stored, place it in its original 
packaging and store it in a dry, frost-free location. 
Storage temperature range 0...40 °C

11

Summary of Contents for PSD 3100 HV





























































Reviews: