T+A PSD 3100 HV, User Manual

Page: 52 / 60

Notes on energy saving
Automatic power down function
The device features an automatic power-down function. If the PSD 3100 HV detects no operation or no
music signal for a period longer than 90 minutes, it automatically switches to stand-by mode
j
In countries outside the EU, in which the EuP directive has no validity, the automatic power-down feature can
be disabled if necessary. See chapter „System settings“.
General information
The PSD 3100 HV satisfies the requirements of the latest directives concerning energy-saving measures
(EuP directive). The modern design of the mains power supply makes an important contribution to this.
The internal micro-processor constantly ensures that sub-assemblies which are not currently required
are automatically switched off. The micro-processor itself operates in stand-by mode at a relatively low
clock speed, and only responds to the remote control receiver.
In stand-by mode the current drain of the PSD 3100 HV is less than 0.5 Watt.
If you intend not to use the device for a long period, it should be disconnected from the mains socket, i.e.
the mains plug should be withdrawn from the wall socket.
Legal Information
General information
This product contains software in form of object code that is partially based on free software under diffe-
rent licenses. Details of the licenses used can be viewed on the device website using an Internet browser.
Show licenses
For details regarding the used licenses, please visit our website by entering the following link:
https://www.ta-hifi.de/support/license-information-g3/
Furthermore, the address can be called up at any time as follows:
• Call up the system configuration menu by pressing the button on the PSD 3100 HV.
• Then navigate to the menu item Device Info. Open it by pressing the SELECT button and navigate to the
menu item Legal information and open it with by pressing the SELECT button again.
• The above Internet address is displayed in the pop-up window that now opens.
52