T+A PDP 3000 HV, User Manual

Page: 75 / 82

75
Transport Notes
Securing the disc drawer
for transport For transport purposes the disc drawer of the PDP 3000 HV can be locked by
tightening a retaining screw in the front panel of the machine.
The screw cannot fall out, i.e. it is not possible to unscrew it completely.
Please note that the retaining screw must be loosened before the
PDP 3000 HV can be operated. This is accomplished by turning the socket-
head screw anti-clockwise as far as it will go, i.e. until it reaches its mechanical
end-stop, as shown below.
The retaining screw should be tightened before transporting the machine. This
entails closing the disc drawer and turning the screw clockwise until you feel
resistance (mechanical end-stop). It is not necessary to tighten the screw
particularly firmly.
Pressure puck
Please remove any CD / SACD from the machine, together with the pressure
puck, to eliminate any chance of transit damage.
The
PDP 3000 HV detects whether the puck is in place. If it is not present, the
disc drawer opens automatically.
If you wish to transport the
PDP 3000 HV without the puck, it is possible to
switch the machine off with the drawer open by briefly pressing the  button
on the front panel; the drawer then closes, and the device switches itself off.