T+A PA 2000 R, User Manual

Page: 40 / 68

40
Remote control
Introduction
In general terms the function of the buttons on the remote control handset is the
same as the corresponding buttons on the machine’s front panel.
The following table shows the remote control buttons and their function when
operating the machine.

The buttons not required to operate the PA 2000 R are not shown in the
illustration of the FM2000.

Switches the device on and off

The loudspeaker group is switched on and off by pressing this
button repeatedly.

Direct source select buttons

…

The listening sources can be selected directly using the SOURCE
buttons
 to  . 



Increase / decrease volume
The volume can be increased / decreased in steps by tipping
one of the volume buttons. The current volume level is displayed
on the display screen. If one of the buttons is kept pressed for
approx.. 2 seconds the volume increases / decreases
continuously until the button is released.


Navigation

Returns to the previous point / change button


Confirms the input / change button


Selects the previous point within a list / select button


Selects the next point within a list / select button


Confirmation button during input procedures
 

Alpha-numeric input


abc
...

wxyz

Special characters are assigned to the

and

buttons.
During the text input process it is possible to switch between
numerical and alpha-numeric input, and between capital and
lower-case letters, using the

button.

During character input:
Switches between numeric and alpha-numeric input, and
between capitals and lower case when pressed (repeatedly)

Opens the configuration menu
(for detail see chapter entitled ' Basic settings of the
PA 2000 HV' )

Opens the tone control settings menu