T+A MP 200, User Manual

Page: 20 / 60

Installation and connection
Installation
Carefully unpack the device and store the original packaging carefully. The carton and packing material
are specially designed for this device and will be a safe container during any later transports. Set up the
device at a proper place. Please observe all notes on connection and set-up in the chapter Safety notes
(pages 10 and 11).
Connection
To use the MP 200 with all its functions and sources, first you have to make some important connections
and/or connect antennas.
The necessary connections are described below:

Do not connect the MP 200 and the other components to the power supply until all the necessary con-
nections have been established.
WLAN antenna
To connect the MP 200 to your network (router) via WLAN, connect one of the two supplied antennas to the
WLAN socket.
j
In case of poor reception conditions, the antenna can be
mounted on the supplied antenna base and placed free-
standing.
j
This antenna is not required if the device is connected to the Internet via a wired network (LAN).
LAN
For the connection to your network (router), connect the network cable to the LAN port.
j
When using the WLAN connection, this socket must remain free!
20