T+A DVD 820 M, User Manual

Page: 67 / 78

67
Operating the DVD 820 M in a system without a DD 820 M
(special operating mode)
If your M-system does not include a DD 820 M , the TV
set can be connected directly to the component output of
the
DVD 820 M using the TV connecting lead and the
S-video adaptor, as shown in the wiring diagram below.
Move the video mode switch to the top position ( Y/C ).
The video input of the TV set must be configured to
S-video (see TV operating instructions).
Note:
The chinch plugs of the S-video-adaptor are coded by the following
colours:
black:
Y-signal
red: C-signal
Wiring diagram: Operating the DVD 820 M in a system without a DD 820 M decoder (TV with EURO-Scart)