5
Display of decoder mode
PRO LOGIC IIx
The decoder automatically switches to this mode for any
analogue stereo source
if it detects that the sound
material is Dolby Surround encoded. For
digital stereo
sources
or 2.0 programme material the machine
automatically
selects PRO LOGIC II if the recorded
material permits it. The corresponding LED lights up.
Note:
The LED only glows if NEO:6 is not selected.
DIGITAL
The decoder
automatically
selects this mode if it
detects at the input a digital multi-channel signal which is
encoded using Dolby Digital. The corresponding LED
glows.
Note:
Some Dolby Digital encoded CDs contain sound signals
encoded
with
Dolby
Surround.
The
decoder
automatically detects this, and uses Dolby Pro Logic II or
NEO:6 for playback.
The decoder
automatically
selects this mode if it detects
at the input a digital multi-channel signal which is dts
encoded. The corresponding LED lights up.
OTHERS
This display is provided for possible expanded functions
which may be developed in the future.
SOUND FIELD (simulated sound fields)
You can switch on this mode
manually
whenever you
wish to generate a simulated sound field to give spatial
effects to any stereo source material. The corresponding
LED lights up.
Note:
With 96 kHz encoded programme material the only
operating modes possible are: Stereo, Mono, Mono 1,
Mono 2 and Disco; see
'
Main Menu
'
.
Integral screen
The display elements of the digital surround decoder are
grouped together in a clearly laid out screen:
a
Alpha-numeric display field.
Context-sensitive messages are displayed
here, e. g. when using the Setup menus.
b
Alpha-numeric display area for showing pre-
amplifier and decoder messages (source
device, volume etc.).
D
Digital input
The assigned digital input is switched on.
Loudness
The volume-dependent tone control is
switched on - see
button.
The symbols listed below light up if the input signal
contains information on the corresponding surround
channel, and a loudspeaker has been assigned to this
channel in the
'
Loudspeaker Menu
'
.
L
Main speaker, front left
C
Centre speaker, front centre
R
Main speaker, front right
LS
Surround speaker, left
S
Left and right back loudspeaker
RS
Surround speaker, right
LF
L
ow
F
requency Effects channel (low bass
channel / subwoofer)
on the
stereo amplifier
Toggles
volume-dependent
tone
correction
(
LOUDNESS
) of the
DD 1535 R
on and off. The display
area of the decoder always shows the current status
briefly in text form; the
symbol in the display window
is the permanent indicator that loudness is switched on.
on the
stereo amplifier
In surround mode switches the tone controls of the
DD 1535 R
on and off.
The display area of the decoder always shows the
current status briefly in text form. The disabled tone
control is indicated by the
=
-symbol.
on the
stereo amplifier
In surround mode also switches the loudspeaker outputs
of the
DD 1535 R
on and off.
All manuals and user guides at all-guides.com
Summary of Contents for DD 1535 R
