Trouble-shooting
Many problems have a simple cause and a
correspondingly simple solution. The following chapter
describes a few difficulties you may encounter, and the
measures you need to take to cure them.
If you find it impossible to solve a problem with the help
of these notes please disconnect the unit from the mains
and ask your authorised
specialist dealer for advice.
Problem:
K1 AV does not switch on (screen and
button do not light up)
Cause:
Mains cable not plugged in correctly.
Remedy:
Check connections, push plugs in firmly.
Problem:
No sound
The MONITOR LED on the screen is
glowing.
Cause:
The
K1 AV
is set to
MONITOR
mode (tape
monitor).
Remedy:
Switch off the MONITOR function by
pressing the
button on the front
panel.
Problem:
No sound
Cause 1:
Loudspeaker output is switched off.
Remedy:
Press the
button on the remote control
handset to switch the loudspeaker output on.
Cause 2:
No
source device
, or incorrect source
device selected.
Remedy:
Select the correct source device.
Cause 3:
The volume is set at too low a level.
Remedy:
Increase the volume setting.
Problem:
No sound from the centre loudspeaker
Cause 1:
Centre speaker not activated in the
‘Amplifier Setup Menu’.
Remedy:
In the Amplifier Setup Menu switch on the
Centre speaker (see chapter
'
Amplifier
Setup Menu - Centre loudspeaker
'
.
Cause 2:
The STEREO operating mode is selected.
Remedy:
Press the green
button on the
remote control handset to switch to one of
the modes
3CH MUSIC
or
3CH MOVIE
.
Problem:
It is not possible to select the modes
3CH MUSIC and 3CH MOVIE.
Cause:
The centre loudspeaker is not activated in
the Amplifier Setup Menu.
Remedy:
Switch on the Centre speaker in the
Amplifier Setup Menu (see chapter
'
Amplifier Setup Menu - Centre
loudspeaker
'
).
Problem:
Poor sound quality, inadequate bass
Cause:
No
sub-woofer
connected, but it is not
switched off in the ‘Amplifier Setup Menu’.
Remedy:
Disable the sub-woofer in the ‘Amplifier
Setup Menu’
(see the chapter
'
Amplifier Setup Menu -
sub-woofer cut-off frequency
'
).
Problem:
Poor sound quality,
distorted
reproduction
Cause:
Very small loudspeakers (especially
satellite speakers) are easily overloaded by
loud low-frequency sound effects.
Remedy:
It is really essential to use an active sub-
woofer in conjunction with SAT speakers.
If you are using SAT speakers, select the
SAT setting for these loudspeakers and
select a high sub-woofer
cut-off frequency
(HIGH).
(see the following points in the chapter
'
Amplifier Setup Menu
'
:
•
Main loudspeakers
•
Centre loudspeaker
•
Sub-woofer cut-off frequency
)
Problem:
Centre-stage sound events are not
reproduced, or are reproduced too
quietly.
Cause 1:
No
centre speaker
connected, but the
Centre is not switched off in the ‘Amplifier
Setup Menu’.
Remedy:
Switch off the Centre in the Amplifier Setup
Menu
(see chapter
'
Amplifier Setup Menu -
Centre loudspeaker
'
).
Cause:2:
A
centre speaker
is connected to the
system, but the Centre is not activated in
the Amplifier Setup Menu.
Remedy:
Switch the Centre on in the Amplifier Setup
Menu
(see chapter
'
Amplifier Setup Menu -
Centre loudspeaker
'
).
52
Summary of Contents for CD Player K1 AV
