T+A CD Player K1 AV, User Manual, Page: 37 / 58

Amplifier Setup Menu point
Volume setting, separate
Explanation:
Normally the volume for the loudspeaker outputs     A and     B is controlled in parallel.
However, if you connect the E2000 external remote control receiver, and if a pair of
loudspeakers is connected to loudspeaker terminals

 

B (preferably in an adjacent room),
this menu point can be used to set up separate volume control for the loudspeaker pairs
    A and     B .
If the multi-room option is selected, only the speakers in the operator’s room will be activated
when you switch on the
K1 AV ; the other pair of speakers remains muted.
The volume for

 

A can only be adjusted using the

 

buttons on the machine, or via
the integral remote control receiver.
The volume for     B can only be adjusted using the external remote control receiver (see
also the chapter ' Multi-room mode ' ).
Operation:
The screen shows the current status of the system:
' VOL A/B ' separate volume control for multi-room use.
or
' VOL A+B ' parallel volume control for single-room use.
Select your preferred option using the buttons     or     . The menu closes when you
press the     button.
If the menu control buttons (

 

,

 

,

 

,

 

,

 

or

 

) are not operated for a
period of about ten seconds, the amplifier interrupts the menu (Timeout) and reverts to the
normal screen display.
37
vo l a/ b