T+A Elektroakustik MP1260R, User Manual

Page: 10 / 48

10
Basic Functions of the MP 1260 R
There are a few basic functions of the
MP 1260 R
which are always available regardless of the selected source
(Streaming Client, …). For example, these include the System Configuration menu, in which device settings such as
screen brightness and language can be carried out.
System Settings (System Configuration menu)
In the System Configuration menu general device settings are adjusted. This menu is described in detail in the following
chapter.
Calling up and operating
the menu
•
The menu is called up by briefly pressing the
   
button on the front
panel
•
When the menu is opened, the following select points appear on the screen:
•
Display Brightness (Screen brightness)
•
Language
•
Device Adr
•
Use the 
 
 / 
 
 to select a menu point.
•
To change a selected menu point, first press the     button, then change
it using the  /  buttons.
•
To accept the setting, press the     button after completing the change.
•
You can press the
   
button at any time to interrupt the procedure, i.e. to
conclude
without
accepting a change.
•
Press the 
 
 button again to leave the menu.
Menu item
Display Brightness
(Screen brightness)
At this point you can adjust the brightness of the integral screen to suit your
personal preference. Available settings are:
•
Off
•
Medium
•
High
Menu item
Language
This menu item lets you select the display language for the
MP 1260 R
.
The language of data received from external sources (eg. iPod, UPnP-AV-
server) depends on the settings of the external device and can
not
be selected
in
MP 1260 R’s
language menu.
Menu item
Device Adr
Here you can assign the source button which selects and activates the
MP 1260 R
as listening source.
The
MP 1260 R
must be connected to the corresponding audio inputs of your

amplifier or receiver.
Network Settings
The operation of this menu is described in detail in the chapter
Installation / Using the system for the first time,
Network Configuration
.
Entering the network
settings menu
•
To enter this menu keep the    
-
button on the front panel pressed until
the menu opens on the display.