T+A Elektroakustik 1235 R, User Manual

Page: 39 / 54

39
Wiring
Notes on wiring
•
You will find wiring diagrams on the following pages.
•
Make all connections as shown in the wiring
diagrams.
•
Push all connectors firmly into their sockets. Loose
connections can cause humming and other unwanted
noises.
• Please also make all necessary adjustments like input
assignments etc. on your surround amplifier or
surround receiver.
• Deploy the mains and loudspeaker cables and the
R
LINK
lead as far as possible from signal inter-
connects and aerial leads.
•
Connect the machine to a properly earthed mains
socket using the mains lead supplied.
•
To obtain maximum interference rejection the mains
plug should be fitted in the mains socket with phase
connected to the mains input socket contact which is
marked with a dot (
). The phase of the mains socket
can be found using a suitable instrument; ask your
specialist dealer for details.
We recommend the use of the ready-made

'POWER LINE' mains lead in conjunction with the
'POWER BAR' mains distribution panel; this unit features
a phase indicator as standard.
Once the system is completely wired, set the volume
control to a very low value and switch the player on.
The integral screen of the DVD 1235 R should now light
up, and the player should respond to control commands.
Place an audio CD in the disc drawer, and press the
    button to start playback.
Switch the amplifier to the source device 'CD' , switch on
the loudspeaker output, and you should hear the CD.
If you encounter problems when using the player for the
first time, please note that they often have simple causes
that are equally simple to correct. Read the chapter
entitled
' Trouble-shooting ' in these instructions.
Loudspeaker and signal cables
The cables employed in any Hi-Fi system have a crucial
influence on the sound of the system as a whole.

therefore recommends the use of high-quality cables and
connectors.
For this reason  has developed its own range of
cables which includes the ideal type for every application.
These cables are designed to match the special
characteristics of our loudspeakers and har-monise
perfectly with them.
For difficult and cramped set-up conditions you can also
use special-length cables and right-angle connectors
from the

range of accessories. With these items you
can solve virtually any problem concerning con-nections
and set-up.
Mains leads and mains filters
The mains power supply carries the essential energy to
operate your equipment, but also often carries inter-
ference from distant equipment, radios and computer
systems.
To shield your equipment from electro-magnetic inter-
ference, our accessory range includes the specially
shielded
'POWER FOUR' mains lead, the ready-made
'POWER LINE' mains lead with integral wrap-around
filters, and the 'POWER BAR' filtered mains distribution
panel. Using these accessories can in many cases
improve the reproduction quality of our equipment.
For any questions concerning cables and wiring please
contact your local
 specialist dealer, who is trained to
provide comprehensive and unbiased assistance. We will
also be delighted to send you a full information pack on
this subject.