2 (2)
0-003-2307-1 (EN)
Controller-Dependant
The functions of the STR250 are
controller- dependent. All local
configuration is carried out using an
M/STAT module.
Adjusting the Room Temperature
Use the Select button to step through
the menu until the Up and Down
arrows are displayed. In this mode,
change the temperature setpoint using
the Increase/Decrease buttons.
Monitoring the Temperature
Use the Select button to step through
the menu until the symbols for indoor
or outdoor temperature are displayed.
Indoor
Outdoor
Temperature
Temperature
Adjusting the Fan Speed
Use the Select button to step through
the menu until the fan symbol is
displayed. If the fan is controllable, use
the Increase/Decrease buttons.
Fan Auto
Fan Off
Fan Speed 1
Fan Speed 2
Fan Speed 3
Trademarks and registered trademarks are the property of their respective owners.
TAC Vista
®
, TAC Menta
®
, TAC Xenta
®
and TAC I-talk
®
are registered trademarks of TAC AB. LonMark
®
and LonWorks
®
are registered trademarks of the Echelon Corporation.
Windows
®
is a registered trademark of Microsoft.
www.tac.com
116 mm (4.6 ")
59 mm (2,32")
24 mm
(0.9")
84 mm (3.3")
82 mm (3.2")
DIMENSIONS
CONFIGURATION
MAINTENANCE
No maintenance is required for this
product. If necessary, the wall module
may be cleaned with a soft cloth.
All local configuration steps for the
controller are carried out using an
M/STAT module plugged into the core
panel of the STR250.
Bypass Button
The Bypass button is used to
force the controller into
occupied mode for a
predefined duration.
Select Button
The Select button is used to
step through the menu.
Increase Button
The Increase button is used
to increase values, when
available.
Decrease Button
The Decrease button is used
to decrease values, when
available.
MOUNTING
The STR250 can be mounted directly
onto the wall or fitted onto a wide
variety of back-boxes/J-boxes.
WIRING
The wall module uses a three-wire
installation. The wiring is easily
accessible thanks to the plug-in
concept.
USER INTERFACE
Front-panel
Core-panel
