Troubleshooting
Specifications
Upright vacuum cleaner Cleansmart 440
High efficiency for energy saving
Lightweight and versatile for comfortable handling
3 stage cyclonic filtration system
HEPA filter that aspirates and purifies at the same time
Metallic telescopic tube with floor brush and narrow nozzle accessories
Oscillating floor brush with wheels
180º brush mobility with 2 positions to clean hard or soft floors
Power cord length: 4.8m
800ml. tank capacity
Suction Power: 14Kpa
Power: 600W
Noise level: < 80dB
Voltage: 220-240V ~ 50/60Hz
Weight: 2,25Kg.
Dimensions: 14,0 x 25,0 x 120 cm (Assembled)
Problema
Posible causa
Posible solución
Low suction
power.
Accessories not well assembled.
Check and tighten all the accessories.
Low suction
power after a
few minutes.
Heavy object obstruction on the
brush.
Remove all object blocking the brush.
Tube contains too much dirt.
Remove the metallic tube and clean it.
Dust container is full.
Empty the dust container and clean the filters.
Power goes off
automatically
after some time.
The Smatrclean 440 includes a
thermostat which activates
when:
1. The motor overheats
2. The dust container is full
1:
Wait for the motor to cool down (30 – 60 min)
2:
Open the dust container and empty the dust. Clean the
filters
Low suction after
using some time.
Dust container is full, or filters
need to be cleaned.
Clean the dust container. Remove the filters and clean
them. If necessary, wash the pre-filter and the Hepa filter.
Let is dry before installing them into the dust container.
