NAP FUNCTION (count down timer)
During radio off mode, press the MEMORY.SET / / NAP button (6) to turn on
NAP mode, the NAP time wills stay for 5 seconds, within 5 seconds press the MEMORY.SET /
/ NAP button (6) button to change the duration from 90 min – 10 min.
The alarm buzzer will sound for 30 min and then shut off automatically. To stop the alarm buzzer,
press the ON/OFF button (7).
Pressing the MEMORY.SET / / NAP button (6) will have no effect during the alarm
operation. Press the ON/OFF button (7) to cancel NAP function.
Remark:
When using the NAP alarm it does not activate the wake up light function.
PROJECTION UNIT
-
Focus setting: Adjust the projection clock brightness/focus by turning the brightness/focus
adjustment wheel unit the projected time is clearly shown on the ceiling or wall.
-
Adjust projected direction.
-
To flip projected image by 180°, press PROJECTION TIME 180° FLIP/TIME-TEMPERATURE
button (14).
NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM.
MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.
SPECIFICATIONS
Frequency range : 87.5 – 108 MHz
Battery backup : 3V (CR2032 Flat Lithium battery x 1) not included
Power supply : AC230V 50Hz
RESETTING
If the system does not respond or exhibits erratic or intermittent operation, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the internal
microcontroller to shut down automatically. If this occurs, simply disconnect the ac power cord and
remove the system backup battery, wait for at least 3 minutes and then setup the unit again as if it
is a brand new unit.
WARNING
1. No naked flame sources, such as lighted candles, should be placed on the apparatus.
2. Do not place the product in closed bookcases or racks without proper ventilation.
3. Where the mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
4. The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
5. It shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
6. Do not connect FM antenna to outside antenna.
Summary of Contents for SY 1035
Page 1: ......
