Sytech SY 1035, User Manual

Page: 4 / 7

Select alarm weekday mode as follows:
1 - 5: Monday to Friday
1 - 7: Whole week
6 - 7: Saturday & Sunday
1
-
1: One day of week
Action (during data adjustment):
- Press << / Tune - (3) button to adjust data backward.
- Press >> / Tune + (5) button to adjust data forward.
-
Keep the << or >> button pressed for 2 seconds to enable auto forward.
- Use AL1 / AL2 set button to confirm each setting.
ALARM
Alarm Duration – Beep alarm or radio alarm will continue for 30 minutes if no key is pressed in
between. When you press any key on the unit it will stop automatically and will repeat the same
process when the alarm goes off again.
SNOOZE FUNCTION
-
During alarm, press the Snooze button (4) to enable the snooze function. Beep alarm or Radio
alarm will stop.
-
Snooze interval is 9 minutes (not include second offset)
-
Snooze will continue unless you press the ON/OFF button (7)
-
The Buzzer alarm or Radio Alarm will stop automatically after 30 minutes.
-
Icon of AL1 and AL2 will blink as long as Snooze function is still operating. Once Snooze is turned
off icon of AL1 / AL2 stop blinking and lights on the display.
DISPLAY LIGHT ON/OFF FUNCTION
- Press MEM. Set / M+ / display light auto on - off /NAP button (6) for 3 seconds, the LED display
indicator will light on, the LED display will turn off after 15 seconds automatically.
Press any button to maintain the LED display for 15 seconds.
- Press MEM. Set / M+ / display light auto on - off /NAP (6) button for 3 seconds, the LED display
indicator will light off to cancel this function.
AUTO CHANGE DISPLAY CONTENT
In radio off mode, press the VOLUME UP / DISPLAY AUTO CHANGE ON/OFF (2) button and
keep it pressed for over 2 seconds to enter time auto change display mode (“ON” will appear on
the display). The Year will be displayed and press again to display Month/Day, the display returns
to time display after 5 seconds, and will display again the same info in cycle.