3.
Specify the
Address Code
parameter.
4.
Select a COM port from the
COM Port
drop-down list.
If the camera has only one COM port, you can skip this step because COM1 is displayed by default.
5.
Click
Save
.
Note
The parameter settings on the NVR must be consistent with those on the camera.
Clicking the
Reset
button will restore the previously saved parameter settings.
6.8 COM
To configure a COM port for a camera:
1.
Click the
COM
tab.
2.
Select a COM port from the
COM
drop-down list.
If the camera has only one COM port, you can skip this step because COM1 is displayed by default.
3.
Specify the
Baud Rate
parameter.
Summary of Contents for SNK RAID series
Page 34: ......
