33
drop-down list near the
Destination Address
parameter.
If the device is not listed, select the
Enter an IP address
option and enter the IP address of the
device in the text box below this option.
3.
Specify the
Number of Tests
and
Timeout Threshold
parameters.
4.
Click
Start Test
.
Under
Test Results
, you can query test results.
4.10 Miscellaneous
DHCP
The Dynamic Host Configuration Protocol (DHCP) is based on the Bootstrap Protocol (BOOTP), which
provides the framework for passing configuration information to hosts on a TCP/IP network. The DHCP
adds the capability to automatically allocate reusable network addresses and configuration options to
Internet hosts.
To enable the DHCP technique, choose
Main Menu
>
Network
>
System Ports
>
DHCP
.
Retransmission upon Packet Loss
The Retransmission upon Packet Loss technique periodically checks whether the NVR receives all
packets transmitted from an encoder or decoder.
Upon detecting packet loss, the technique sends a retransmission request to the packet transmitter.
To enable the technique,
Main Menu
>
Network
>
System Ports
>
Retransmission upon Packet
Loss
, as shown in the following figure.
Summary of Contents for SNK RAID series
Page 34: ......
