SYStronics TIC-4M, User Manual, Page: 14 / 23

TIC-4M MANUAL
14
Manual Menu
Alarm Setting
Category Display Set.value Start value Contents
Comp.
Alarm
OFF /
1~250sec
5 sec
If the input to the COMP status input is detected or not detected during the
set time after the COMP output Set the detection time so that an alarm
occurs.
OFF: Alarm is not checked when set.
Heater
Alarm
OFF /
1~250sec
5 sec
If the input to the auxiliary heater status input is detected or set during the
set time after the auxiliary heater output If not, set the detection time to
trigger an alarm.
OFF: Alarm is not checked when set.
High Temp.
Alarm
OFF /
-40.0
~150.0℃
OFF
If the current temperature is higher than the high alarm set temperature, an
alarm is generated. If the temperature is 1 degree below the set point of
the high temperature alarm, the alarm is cleared.
Heater operation stops when high temperature alarm occurs. / OFF: Alarm is not
checked when set.
Low Temp.
Alarm
OFF /
-40.0
~150.0℃
OFF
If the current temperature drops below the set low temperature alarm, an
alarm is generated. If the temperature rises 1 degree above the low \
temperature alarm setpoint, the alarm is cleared.
Cooling operation stops when low temperature alarm occurs. / OFF: Alarm is not
checked when set.
Integration Time
Category Display Contents
Fan, Comp.
Heater
Integration
Time
A function that can check the operation time of each port.
The display is expressed as 1 per 24 hours. (Eg display 2 = 48 hours
operation)
To delete the accumulated time, select the delete list and press the DEF
key for about 5 seconds to delete