Make sure your audio source is playing music first.
Power LED lights up red when in standby.
The ZAM shows a blue LED indicating that the zone is on.
Press the power button on the keypad to turn the
zone on. Use the volume up and volume down
buttons to increase or decrease the volume. Pressing
the power button again switches to local source (see
below) and a third press goes back to standby.
The ZAM shows a green LED when playing from a local
source.
Note: The local input can be disabled on the keypad by pressing the volume up button
and the power button simultaneously. Repeat this procedure to re-enable the local input.
LOCAL
SYSTEM
POWER
LOCAL
SYSTEM
POWER
LOCAL
SYSTEM
POWER
Operating instructions
Summary of Contents for SM3160
Page 11: ......
