Connect a keypad (E) in each zone:
Select a 3 metre data patch cable (F) and cut off the plug at one end only. Peel back
the cut end and terminate the brown, white/brown, blue and white/blue wires to the
connector as shown below.
Note: do not strip off the conductor sleeving. The other four
green and orange wires are not used.
Use the supplied punch down tool to push each cable down firmly.
Note: make sure
that the largest tooth of the tool is on the side of the terminal block with the coloured
sticker as shown above (right).
8.
Plug keypads into the ZAM in each zone.
9.
B
LOCAL
SYSTEM
POWER
ZAM40
KEYPAD
Cat5 cable
ZAM40
ZAM40
ZAM40
E
E
J
E
Summary of Contents for SM3160
Page 11: ......