6
7.0 Setting up a Virgin Media remote control
Some Virgin Media remote control can be set up to control an amplifier or TV. We have tested
remote control type 13 listed on the website and pictured below:
7.1 Turn the S7 zone onto a local source with a LIM and IR receiver and turn the volume up.
7.2 On the Virgin Media remote control press and hold
Clear
and then
Vol+
until the LED flashes
green twice.
7.3 Enter the code
1999
, the LED will flash twice.
7.4 Point the remote at the IR receiver and press the
Ch+
button until the volume mutes,
it should take 6 presses.
7.5 Press
Mute
to turn the volume back on.
7.6 Press
OK
to store this.
7.7
Vol+
,
Vol-
and
Mute
should now operate the NetAmp.
Please note: it is not possible to set up this remote to control the TV and the NetAmp.
Volume up
Mute
Volume down